SOLAR KIT INCLUDES
Solar Panel 125 Watt 12 Volt Polycrystalline - 1 pcs
50FT Solar Panel Extension Wires Set MC4 - 1 pcs
Bottom Feeder 1500 - Solar Pump Filter System - 1 pcs
Circuit Braker - 1 pcs
Recommended Power Source:
Solar Panel: 125+ watt, 12 volts, 7+ Amp
Wind Turbine: 125+ watt, 12 volts, 7+ Amp
Battery Power: 24 volt, 75+ Amps
Note: Always connect a DC Circuit Breaker and Ground Fault Protector
The Bottom Feeder Pool Filter is needed because of the overwhelming expense you're spending
on pumping and filtering your swimming pool water. The Bottom Feeder Pool Filter isn't just different;
it's a better way to filter your pool or spa. The Bottom Feeder finally gives you an opportunity to turn
off your inefficient, noisy, and expensive to operate pool equipment... and it reduces your pollution
which is better for our planet. The Bottom Feeder Pool Filter uses the energy from the sun to pump
up to 15,000 gallons a day through (3) three reusable 20 micron filter cartridges.
The Bottom Feeder Pool Filter is EASY and requires less maintenance than your existing pool filter.
This Pump and Filter System pays you to own it, from $1.00 to $5.00 EVERY SINGLE DAY!
Pool, Spa and Water pump and filter system that SAVES ENERGY and MONEY!
Pumps and Filters up to 15,000 gallons per day through 3 reusable 20 micron filter cartridges
Zero Energy Cost
Alternative Pump and Filter System
Maintains family-safe water quality
Pays for itself in just months
One year limited warranty
Made in the USA
Pump and Filter System Size: 17 ½ W x 17 ½ L x 25 ½ H inches
Pump and Filter System Weight: 33 lbs.
Pump and Filter System Body Type: Polyvinyl Chloride
Filter Media: 216 pleat count, 3-ounce reemay 2033; 20 micron cartridges
Filter System Effective Filtration Area (Sq Ft): 156 square feet
Pump Flow Rate: 15,000-Gallon-Per-Day (GPD)
Pump Flow Rate: 1,500-Gallon-Per-Hour (GPH)
Pump Flow Rate: 25 Gallon-Per-Minute (GPM)
Pump Maximum Head: 10 Feet
Pump Hose Outlet (In.) : 1 1/8
Pump Maximum water Temperature: 104 Degrees F
Pump Typical Life: 2500 hours | 6 Hours a day = 416 days |
Pump Voltage: 12
Pump Amps: 4.8
Pump Shaft Material: Stainless Steel
Pump Certifications: UL, CE and ISO 8849
Solar Power Cord: 50FT 12 AWG Extension Wires w/ MC4 Connectors
Power Cable made of electron-beam cross-linked insulation and coating; high resistance against heat, cold, oil, abrasion, ozone, UV and weather; with improved reaction in case of fire; low smoke, halogen free, flame free, flame retardant; flexible, easy to strip, very low space requirement, extremely mechanically robust, very long lifetime.
Nominal Voltage: 600 V DC
Temperature rating: 90C, 194F 12 AWG
Reference Standard: UL 4703
Electron-beam cross-linked compounds
Insulation thickness 1.22 mm, 0.048in Insulation: 90 XLPE, black
Jacket thickness 0.8mm, 0.032in 90 XLPE, black or white
Photovoltaic Combiner, breakers and DC Ground Fault Protector Box.
Photovoltaic combiner: Compliance with NEC requirements
Photovoltaic combiner: ETL listed for use in the U.S. and Canada.
Photovoltaic combiner: Mount Type: Wall
Photovoltaic combiner: Enclosure Type: Injection molded insulating
Photovoltaic combiner: Deadfront under aluminum flip-up exterior cover
Photovoltaic combiner: Material Type: Rainproof NEMA 3R aluminum enclosure
Photovoltaic combiner: Dimensions: 10 1/2 L x 5 W x 3 1/2 H (in.)
Photovoltaic combiner: Manufacturer Warranty: 5 year limited warranty
Photovoltaic combiner: Ship Weight: 2.5 lbs
DC Circuit Breaker: Can also work as on-off switch for DC load circuits
DC Circuit Breaker: Class Rating Meets NEC requirements
DC Circuit Breaker: Amps: 12
DC Circuit Breaker: Manufacturer Warranty: 5 year limited warranty
DC Ground Fault Protector: (GFI - UL listed breaker assy)
DC Ground Fault Protector: Solar 63 amp DC ground fault protector
DC Ground Fault Protector: UL listed
DC Ground Fault Protector: NEC2008 requires DC-GFP in ALL installations.